The Idea That Was Supposed to Fail
Why DirectFlash and Evergreen//One suddenly look a lot smarter in a world of NAND and DRAM price shocks Dmitry Gorbatov Mar 20, 2026 Important Note for my readers: Writing this piece took me a lot longer than I normally spend on a post. It took a lot of reading and research. Many articles and blogs were written on the subject before NAND and DRAM costs went crazy. The dry-humor version is that the storage industry spent years insisting flash was just disk with better manners, and then acted surprised when the underlying physics eventually asked to speak with management. Now, let’s get to it. I can still picture the room. It wasn’t anything special — just another corporate competitive training session, the kind you’ve sat through many times if you’ve spent enough years in enterprise tech. This was at NetApp, in 2015 or 2016, back when flash was still a question mark. Not if, but how. The industry had not fully committed yet, and everyone was trying to figure out what role it would play. The presenter clicked to the next slide, paused for a second, and said something that stuck with me in a way most of those sessions never do: “Pure Storage is crazy! They’re building their own flash modules. That’s stupid. It’s not sustainable. They won’t survive.” It wasn’t said for effect. There was no dramatic pause afterward, no attempt to persuade. It was delivered as a simple, almost obvious conclusion. And to be fair, it felt obvious. Because the entire storage industry operated on a shared assumption: you didn’t build components, you assembled them. You relied on a mature ecosystem of suppliers who specialized in drives, storage controllers, and memory, and you focused your differentiation on software features and integration. That was the efficient path. That was the scalable path. That was how serious companies behaved. What Pure was proposing at the time — what would later become Everpure — felt like a deviation from that logic. Building your own flash modules didn’t just introduce complexity; it seemed to reject the economic advantages of the broader supply chain. It looked like a risk without a clear payoff. So the conclusion made sense. Until it didn’t. Looking Back, Differently If I think back to that training session now, I do not really see it as a moment where someone was foolish. I see it as a moment where the industry was trapped inside the logic of its own assumptions. If you believe flash should look like disk, then building your own flash modules sounds silly. If you believe storage is just a sequence of refresh cycles, then a model built around non-disruptive evolution sounds unnecessary. If you believe component pricing will keep trending in the right direction forever, then architectural efficiency feels like an academic luxury. But once those assumptions start to crack, the logic changes. And when it changes, the things that once looked eccentric start to look oddly prescient. A Change You Don’t Notice Right Away For years, nothing about that statement felt particularly worth revisiting. The industry moved forward in predictable ways. Flash became mainstream. Performance improved. Density increased. Vendors competed on features, benchmarks, and price points. The conversations most of us had with customers followed familiar patterns. If anything, the abstraction layers built around flash made things easier to consume. SSDs behaved like faster disks — and that was good enough. There is a reason they showed up in familiar HDD form factors. The industry was trying to preserve the old world while sneaking in a new medium. Keep the slots. Keep the enclosures. Keep the assumptions. Change as little as possible. That made adoption easier, but it also buried the problem. Because flash is not a disk. It never was. It does not behave like one, and it does not particularly enjoy being treated like one. The only reason the illusion worked is because the industry built a fairly elaborate translation layer to maintain it. That translation layer is where the story really starts. The Trick That Made Flash Look Simple When commodity SSDs became the standard way to bring flash into enterprise storage, they depended on a piece of internal firmware called the Flash Translation Layer, or FTL. Its job was deceptively simple: make raw NAND look like a disk. That sounds harmless enough until you think about what that actually requires. NAND cannot just overwrite data in place the way the rest of the stack would like it to. It has to handle erase cycles, wear leveling, garbage collection, bad block management, and the constant translation between logical addresses and physical locations on the media. So every SSD became its own little self-contained world, complete with its own controller, its own metadata tables, and its own DRAM to keep track of everything. In other words, every drive became a tiny independent computer, making local decisions in isolation. That design solved the adoption problem. It did not solve the architecture problem. For a while, the tradeoff seemed worth it. The drives were fast enough, the packaging was familiar, and the whole system kept pretending that flash was just a much nicer version of disk. But what looked neat and modular at small scale turned out to be awkward and expensive at enterprise scale. And that is where the “stupid” decision begins to look a lot smarter. What Commodity SSDs Actually Drag Along With Them The more I researched this topic (and believe me I did), the more I realized how much of the industry got comfortable with an abstraction that was doing a lot of quiet damage. Commodity SSDs carry four structural inefficiencies that matter much more today than they did when pricing was stable. Trapped DRAM. Every SSD maintains its own mapping tables, so large-scale systems end up carrying a remarkable amount of DRAM inside the drives themselves. That memory is necessary for the SSD to function, but it does not really help the array think globally. It is duplicated overhead, repeated again and again, drive by drive. In a petabyte-scale system, that is not a rounding error. It is cost, power, and complexity hiding in plain sight. Unpredictable Latency. Garbage collection inside a traditional SSD happens when the drive decides it needs to happen. When that occurs, the drive may become temporarily less responsive, and in an array full of independent drives, those little stalls start to show up as tail-latency spikes. The system is always vulnerable to one drive having a private crisis at exactly the wrong time. Write Amplification. Because the SSD does not really understand the workload or the data structures above it, it moves data more often than necessary. More movement means more writes. More writes mean more wear. More wear means the media gets consumed faster than it should. Over-provisioning. Every SSD holds back some raw capacity for its own housekeeping and spare-cell management, but that reserved space is siloed. The array cannot use it intelligently across the system because each drive is managing its own private affairs. None of this sounded especially dramatic when NAND kept getting cheaper and the economics of flash kept improving. It sounded like engineering trivia. The sort of thing infrastructure people argue about while everyone else waits for the quote. Today it is not trivia. Today it is exposure. Why AI Made This Suddenly Everyone’s Problem For years, one of the quiet assumptions in enterprise IT was that storage capacity would continue to become cheaper and more abundant over time. Not perfectly, not smoothly, but predictably enough that the inefficiencies of the underlying architecture could be tolerated. That assumption is now not only under pressure, it is getting decimated. AI did not just create a new category of interesting workloads. It created a global appetite for silicon that is large enough to bend supply curves. The cute part of AI is easy to mock. The cat kicking the T-Rex. The surreal generated videos. The deepfakes that make you look twice and then sigh a little for civilization. But behind every one of those outputs is a less funny reality: extraordinary consumption of DRAM, NAND, GPUs, and supporting infrastructure. The novelty at the edge is powered by very serious resource demand at the core. And that demand is landing directly on the components enterprise storage depends on. This is the part customers are beginning to feel in ways that are no longer abstract. Expansion quotes do not look as comfortable as they once did. Refresh cycles feel more expensive. Delivery windows stretch. Budgets built on assumptions from even two years ago suddenly need more explaining than anyone wanted. There is a tendency to call this inflation because that is the easiest word available. It is not really inflation. It is supply and demand, with a side of semiconductor reality. And that matters, because a traditional SSD array is exposed to both sides of the problem at once. It is exposed to NAND because that is the medium you are buying, and it is exposed to DRAM because every SSD drags its own DRAM overhead along for the ride. When those two markets tighten at the same time, the cost of the architecture gets hit twice. That is not just a technical nuance. That is economics. Revisiting the “Stupid” Decision This is where the old training-room comment starts to age badly. Because what looked like unnecessary vertical integration was really a decision to stop pretending flash was a disk and start treating it like what it actually is: semiconductor media with very specific physical behaviors that should be managed at the system level, not hidden inside dozens of drives. That is the DirectFlash idea in plain English. Take the Flash Translation Layer out of the individual drive. Pull media management into the operating environment. Let Purity manage flash globally instead of leaving each device to improvise its own local strategy. That changes more than performance charts. It means metadata no longer has to be duplicated and trapped inside every SSD. It means wear leveling can happen across the full system instead of inside the borders of a single device. It means bad block handling, garbage collection, and data placement can be coordinated with global context. It means the platform can see the difference between data that should live together and data that should not, which dramatically reduces unnecessary movement and lowers write amplification. And when write amplification drops, the economics change. The NAND lasts longer. The useful life of the media extends. Lower-endurance flash, like QLC, becomes viable for serious enterprise use because the software is smart enough not to abuse it. The system extracts more useful work from the same raw silicon. That is not just clever engineering. That is insulation from volatility. The reason this matters now is that DirectFlash changes the ratio between the silicon you buy and the value you get from it. If the rest of the market is paying more for NAND and more for DRAM, an architecture that reduces trapped DRAM, minimizes wasted writes, extends media life, and packs far more capacity into far denser modules is not just elegant. It is economically defensive. This is where the old “they build their own flash” criticism misses the point. Building your own flash modules was never the point by itself. The point was controlling the relationship between software and media well enough to eliminate the inefficiencies the commodity model had normalized. Why Purity Is the Real Story DirectFlash makes for a good visual. It is a module. You can point to it. You can talk about density and reliability and the fact that a 150TB module can do work that would have required a small army of traditional devices not all that long ago. But the real story is Purity Operating Environment, i.e. software. Purity is where the architectural bet pays off. It is what turns raw NAND into a coordinated system instead of a pile of politely disagreeing SSDs. Because Purity sees the entire media pool, it can write more intelligently. It can group data with similar expected lifespans together, so that when a snapshot or a temporary workload disappears, whole regions of storage can be retired cleanly instead of forcing background reshuffling of still-live data. That reduces unnecessary churn. Less churn means fewer writes. Fewer writes mean longer media life. Because Purity sees when a NAND die is busy with an erase or program cycle, it can avoid letting that become a host-visible performance problem. RAID-3D and system-level awareness allow the platform to reconstruct data from parity rather than simply waiting for a busy drive to get its act together. The end result is deterministic performance rather than a roulette wheel of occasional latency spikes. Because Purity owns media management globally, the over-provisioning and spare resources are no longer trapped in per-drive silos. The system can use them strategically. I know that all of this sounds a bit scientific, and to be fair, it is. I did spend over 7 years working for Everpure and a few weeks researching for this post. I wanted to sit with that science for a bit. Where the Economics Start to Matter The moment component pricing becomes unpredictable, architecture stops being an engineering preference and starts becoming a financial strategy. That is the part that matters most to customers right now. A traditional buying model assumes that at some point you will hit a refresh cycle, a capacity wall, or a migration event that forces a purchase whether the market timing is good or terrible. You buy when you have to buy. If NAND is expensive, that is unfortunate. If DRAM is expensive too, even better, because apparently the universe enjoys symmetry. That is what makes the combination of DirectFlash and Evergreen so important. DirectFlash reduces the amount of waste, duplication, and premature wear in the system. Evergreen removes the old habit of tying innovation to forklift replacement. Controllers evolve. Capacity can be consolidated into denser modules over time. Data stays in place. The customer is not forced into rebuying the whole environment every few years just to remain current. That already changes the economics. But it still leaves one more question: who is carrying the price risk? And this is where Evergreen//One matters more than ever. The Part I Actually Wanted to Get To Evergreen//One is not just a consumption model. It is not just a nicer way to finance storage. It is a mechanism for moving volatility away from the customer. That is the conclusion I wanted to earn, not just declare. When NAND and DRAM prices start climbing, most traditional models push that turbulence straight into the customer’s planning cycle. The customer eats the increase, absorbs the uncertainty, and tries to explain to the business why the infrastructure line now behaves like it has a gambling problem. Evergreen//One changes that relationship. The customer consumes capacity as a service. Everpure owns the burden of the underlying hardware lifecycle, the media strategy, and the ongoing optimization. DirectFlash makes that model stronger because the platform is structurally more efficient with the silicon it uses. It needs less trapped DRAM, wastes fewer writes, extends media life, and supports denser modules that deliver more usable capacity per unit of power, space, and raw media. Purity compounds that advantage with data reduction, ongoing software improvements, and smarter system-wide media management. Put differently, Everpure is in a much better position to absorb and manage component volatility than a customer buying boxes on a refresh schedule. That is the real price protection story. Not some magical promise that economics no longer apply. They do. NAND still costs what NAND costs. DRAM still costs what DRAM costs. Physics remains annoyingly undefeated. The difference is who is exposed to that volatility, how much inefficiency is built into the system before the customer ever sees it, and whether the operating model gives the customer a stable runway instead of a quarterly surprise. DirectFlash reduces the waste. Evergreen removes the forced disruption. Evergreen//One shifts the risk. That combination is a lot more interesting than it sounded in that room 11 years ago. The Part I Didn’t Appreciate Then What I did not understand sitting in that room 11 years ago was that some decisions are made for futures that have not arrived yet. The market eventually caught up to the architecture. That does not happen often enough in enterprise tech to ignore when it does. DirectFlash was never interesting just because it was different. It was interesting because it removed layers of inherited inefficiency that the rest of the market had accepted as normal. And in a period where NAND and DRAM pricing are under pressure, removing inefficiency is no longer just a performance story. It is a protection story. That is why this matters now. Not because it makes for a clever slide. Because it gives customers a more predictable way forward when the underlying component markets are anything but predictable. And in the current environment, that might be the most practical definition of innovation there is. Appreciate you reading. Dmitry Gorbatov © 2025 Dmitry Gorbatov | #dmitrywashereCatching up
Hey all! It's been a while since I've posted here and I feel compelled to reach out to see what everyone is working on. Like all of us, I've been pulled in many different directions lately (power, cooling, security camera's), and it has made me appreciate that managing our Everpure environment allows me cycles to focus elsewhere. Current storage related projects are, Cloudsnap: working with the Everpure support team to get cloudsnap working so that we can investigate long term backups to our Flashblades or S3 in the cloud. Integration with CyberArk: Again, working with the Everpure support team to enable privileged users with rotating passwords to work with our Everpure management environment. Pureprotect: Chad Montieth and Suresh Madhu have been instrumental in our testing and development of a case to possibly replace SRM for DR failover and testing. Don't forget about Accelerate June 16th - 18th in Las Vegas. This is a worthwhile event that provides free training classes and certification tests. Jason Finley and I from SEHP get to attend this year. register here Begin Registration - Pure Accelerate 2026 What are you working on? Share with the group any success or challenges. Keep an eye on the community page next week for an update from Nick Fritsch. Happy Easter all! - CharliePure Certifications
Hey gang, If any of you currently hold a Flash Array certification there is an alternative to retaking the test to renew your cert. The Continuing Pure Education (CPE) program takes into account learning activities and community engagement and contribution hours to renew your FA certification. I just successfully renewed my Flash Array Storage Professional cert by tracking my activities. Below are the details I received from Pure. Customers can earn 1 CPE credit per hour of session attendance at Accelerate, for a maximum of 10 CPEs total (i.e., up to 10 hours of sessions). Sessions must be attended live. I would go ahead and add all the sessions you attended at Accelerate to the CPE_Submission form. Associate-level certifications will auto-renew as long as there is at least one active higher-level certification (e.g., Data Storage Associate will auto-renew anytime a Professional-level cert is renewed). All certifications other than the Data Storage Associate should be renewed separately. At this time, the CPE program only applies to FlashArray-based exams. Non- FA exams may be renewed by retaking the respective test every three years. You should be able to get the CPE submission form from your account team. Once complete email your recertification Log to peak-education@purestorage.com for formal processing.Pure1 Manage Assessment
Hey Cincy PUG, I found a cool feature for detecting changes on your Flash Array. Looking at Data Protection under the Assessment menu I saw a lightning bolt on one of my arrays. That lightning bolt led me to an evaluation showing that there had been a significant drop in DRR for a group of volumes. Turns out that change was benign because one of my teammates refreshed an environment causing the change in the Data Reduction Ratio. I see this as just another way Pure 1 Manage can help admins detect threats or problems with data sets. How are you using the tools in Pure1? Share something with the group! -CharlesWe are just one week away PUG#3
January 28th, the Cincinnati Pure User Group will be convening at Ace's Pickleball to discuss Enterprise file. We will be joined by Matt Niederhelman Unstructured Data Field Solutions Architect to help guide conversation and answer questions about what he is experiencing amongst other customers. Click the link below to register and come join us. Help us guide the conversation with your ideas for future topics. https://info.purestorage.com/2025-Q4AMS-COMREPLTFSCincinnatiPUG-LP_01---Registration-Page.htmlCincinnati PUG 3
Well, it's the start of the year and time to start planning our next Cincinnati User Group. In our last meeting we discussed Cyber Resiliency with Shawn Snider, Chief Information Security Officer at SEHP. This session we look to tackle topics around Enterprise File. We have targeted January 28th, again at Ace's Pickleball. I or Nick Fritsch will post the verified details soon. Looking forward to more great discussion and collaboration!
Flashcrew Manchester
🤝 Flashcrew Pure Usergroup | Manchester | For our amazing customers! Connect with fellow Pure users and dive deep into the //Accelerate announcements. Learn how to extract even more value from the Pure ecosystem and get your technical questions answered by the experts. Register here: https://info.purestorage.com/2025-Q2EMEA-UKREPLHCOFY26Q3-FlashCrew-Manchester-LP_01---Registration-Page.html We also open these up to non-customers interested in Pure, helping you learn from those already benefitting from the Pure Enterprise Data Platform. Please DM me if you would like an invite.
Boston PUG - August 21, 2025
Hey there Connecticut PUG members. I wanted to let you all know there is a Boston PUG event taking place August 21, 2025 at Trillium - Fort Point in the Seaport. If you have time to spare to hang with Pure and other like-minded, beer-loving individuals then please drive up to hang out with us. You can find more about the event at the link below: Boston PUG information link I hope some of you are interested in driving up for the afternoon. We will host a PUG in Connecticut in the near future. Stay tuned...
